Download Dell WD19 Drivers on Windows 11 and 10

Dell WD19 docking station is widely used among users to connect different external devices to the computer even without a compatible USB port. Normally, users try to use the Dell docking station to connect a keyboard, mouse, external disk drive, or an external monitor to a Windows PC.

Unfortunately, many users hit upon an error that the Dell WD19 docking station failed to be recognized by the Windows computer. It mostly means that the Windows PC didn’t verify the WD19 driver, thus not allowing it to work on Windows 10 or 11.

In some cases, if you have just upgraded the Windows operating system from Windows 7 to Windows 10 or from Windows 10 to Windows 11, you shall also update the Dell dock driver to make sure it is compatible with the Windows system. In this article, you can both the automatic and manual methods to install Dell WD19 dock drivers.

Do you want to download and install the updated WD19 docking station driver to ensure the driver smoothly connects the Dell docking station hardware with the Windows system? Do you want to fix Dell WD19 not detecting error? You can either try to get the right Dell WD19 driver automatically or manually according to your time and computer proficiency.

Method 1: Update Dell WD19 Drivers Automatically

As many users complained that the Dell WD19 driver isn’t found, detected, or loaded on Windows 10 or 11, there is much need for you to keep the Dell docking station drivers up-to-date.

If you are not proficient in handling computer issues by yourself, you can just make the best use of the safe and professional driver downloader, updater, and installer, Driver Booster. This tool will automatically search for, download, and install the compatible device drivers for your Windows device, including the WD19 dock driver.

1. Download, install and run Driver Booster.

2. Click the Scan button.

3. In the scanning results, find out the Dell WD19 driver and Update it.

4. Wait until the docking station driver is automatically installed on your PC.

After that, you can try to reconnect your external drive or monitor to the Windows device via the Dell WD19 docking station. With the compatible WD19 driver, you can notice that the Dell WD19 driver is detected by the Windows system and you can connect external devices to the PC successfully.

Method 2: Download Dell WD19 Driver Manually

Some users don’t want to download a third-party tool to get the Dell WD19 driver. If so, you may have to find, download, and install the Dell docking station driver yourself.

That is to say, you can navigate to Dell’s official website to search for the dock station driver. If needed, users can also download Dell Thunderbolt WD19 software to configure this external device on Windows systems.

1. Go to Dell Support.

2. Under Drivers & Downloads, input wd19 in the search box and then pick out Dell dock wd19 from the list.

3. Hit Search to move on.

3. On the next page, under Driver & Downloads, select Windows 11 from the list of the operating system.

Here, according to your operating system, you can also choose to download Windows 10, a 64-bit driver.

4. Locate the Dell WD19 driver and then hit Download.

5. Follow the on-screen instructions to install the dock driver on the Windows device.

You can download the latest WD19 docking station driver and firmware update utility on the official website at the same time. This driver will connect the Dell docking station with the Windows system. After that, you can see that Windows 11 or 10 recognizes the WD19 docking station.

Summary:

With the help of this post, you can find specific steps to download and update Dell WD19 drivers on Windows 11 and 10. In this way, you can find that the “WD19 driver not available” error or any other problems disappeared.